Publicité
When AirDry opens the door, TimeBeam
is off. To check the remaining time of the
running programme, look at the control
panel display.
6.7 PNC number
If you contact an Authorised Service Centre,
you need to provide the product number code
(PNC number) of your appliance.
7. WIRELESS CONNECTION
You can connect your dishwasher to the
home wireless network and then link it to your
mobile devices in the app. This functionality
allows you to remotely control and monitor
your dishwasher.
Wi-Fi module parameters
Wi-Fi module
NIUS-SA
Frequency
2.412 - 2.472 GHz
Protocol
IEEE 802.11 b-g-n
Max Power
<20 dBm
Encryption
WPA, WPA2
7.1 How to connect the dishwasher
to the network and to the app
To connect your dishwasher, you need:
• Wireless network with the Internet
connection.
• Mobile device connected to the wireless
network.
1. To download the app, scan the QR code
located on the back cover of the user
manual. You can also download the app
directly from the app store.
2. Follow the instructions in the app.
3. Turn on the dishwasher.
4. To activate the wireless connection,
follow one of the two methods:
• Press and hold simultaneously
for 2 seconds.
• Enter setting mode, select the setting
WiFi and change its values to ON.
14
ENGLISH
The number can be found on the rating plate
on the appliance door. You can also check
the number on the display. Select PNC
number from the setting list to check the
number.
The display shows Wi-Fi is starting up and
then Wi-Fi is ready.
5. When prompted, enter the home network
credentials in the app.
If the credentials are not entered, the
dishwasher deactivates the wireless
connection after some time.
If the connection is successful, the
dishwasher displays Connection
successful. Refer to "Daily use" chapter to
activate remote start.
If the connection is unsuccessful or the
display shows Updating, refer to
"Troubleshooting" chapter.
To cancel the procedure, press any active
button and confirm the cancellation.
Alternatively, deactivate and activate the
appliance.
7.2 How to deactivate the wireless
connection
Enter setting mode, select the setting WiFi
and change its value to OFF.
7.3 How to activate the wireless
connection
and
Enter setting mode, select the setting WiFi
and change its value to ON.
Refer to "Daily use" chapter to activate the
remote start.
Publicité
