Publicité
After pressing the START/PAUSE button the
time showed decrease minute after minute.
Opening of the porthole with delayed
start set, after re-closing the porthole,
press start again to resume the counting.
DRY LEVEL button
This button allows to set the desired
dryness level. On the display is shown as
below:
Ready to Iron: it leaves the garments
slightly wet to facilitate ironing.
Ready to Wear: to get garment ready
to be hang.
Cupboard: for laundry that can be
directly stored.
TEMPERATURE button
This
button
is
set
temperature based on personal needs and
requirements. There are 3 levels and
matching display is shown below:
High temperature.
Middle temperature.
Low temperature.
I-TIME button
This function is designed to allow users to
adjust cycle duration based on personal
needs (can be used only on some
programmes as shown in the table of
programmes).
The progressive pressure increases the
time in 10 minutes intervals. After this
selection to reset the automatic drying
functioning is necessary to switch off
the dryer.
In case of incompatibility, the indicator
light goes to TIMER programme.
to
adjust
drying
79
ANTI-CREASE button
ANTI-CREASE function is designed to
help remove wrinkles of clothes. The
drum will rotate after the drying cycle to
stretch clothes so there is no need to
worry about forgetting to take out clothes.
When the drying cycle ends, if ANTI-
CREASE was previously selected the
indicator will light up. The drum will keep
rotation for another 6 hours with cold wind in.
To stop the movements press ON/OFF
button. Useful when it's not possible to
remove immediately the laundry.
HYGIENIC button*
HYGIENIC function is designed to kill
bacteria and mites as well as virus on
clothes with high temperature. When
selecting the HYGIENIC function, this
indicator is the perfect cycle to use if you
want to remove bad smells from the linens
smoothing creases. This cycle can quickly
refresh the garments that you need, ensuring
the best compromise between time and
drying
performance.
HYGIENIC function, this button will keep
light on for the whole cycle duration.
If you want to select this option, press the
HYGIENIC button once. It is available
only during program selection. This option
overwrites the program selected with a
dedicated one.
If you want to deselect the HYGIENIC
option, press the HYGIENIC button.
When you deselect the option, the
machine will show again the original
program name.
*
BAF certificated
CHILD LOCK
Pressing simultaneously the buttons "H"
and "I" for about 3 seconds, the machine
allows you to lock the keys. In this way,
you can avoid making accidental or
unwanted changes if a button on the
display is pressed accidently during a
cycle
.
After
selecting
Publicité
