Publicité
4.5 Special programmes
For specific applications, select any of the following
programmes.
• Rinse+Spin
A program designed for users to rinse and dehydrate
• Spin
Use this programme to apply an additional spin cycle
for your laundry or to drain the water in the machine.
Before selecting this programme, select the desired
spin speed and press Start / Pause button. First, the
machine will drain the water inside of it. Then, it will
spin the laundry with the set spin speed and drain
the water coming out of them. If you wish to drain
only the water without spinning your laundry, select
the Pump+Spin programme and then select the No Spin
function with the help of Spin Speed Adjustment button.
Press Start / Pause button.
Use a lower spin speed for delicate laundries.
4.8 Programme and consumption table
EN
Programme
Max.
load
(kg)
3.5
Mix
30
Quick 15'
C
o
d l
1
Silk
Cold
1.5
3.5
Bedding
30
2
Under ear
40
Rinse+Spin
-
Max.
Spin
-
Max.
- Energy test program: ECO 40-60. .
- The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures
and longer duration.
- Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning
phase, the higher the noise and the lower the remaining moisture content.
- Specify the noise test program: Cotton+60°C+Maximum speed+ Then long press Rinse+&Wash+ for 5 seconds
at the same time, click start/pause to enter the noise test program;
- More data information, please scan the QR code on the energy label.
4.9 Auxiliary function selection
Select the desired auxiliary functions before starting the prog-
ramme. Furthermore, you may also select or cancel auxiliary
functions that are suitable to the running programme without
pressing the Start / Pause button when the machine is operating.
For this, the machine must be in a step before the auxiliary
function you are going to select or cancel.If the auxiliary
function cannot be selected or canceled, light of the relevant
auxiliary function will blink 3 times to warn the user.
www.linarie.com.au
Auxiliary
functions
Selectable
Wash
Rinse
Delay
temperature
+
+
Range °C
Cold-60
Cold-30
Cold-40
Cold-60
Cold-90
-
-
4.6 Temperature selection
Whenever a new program is selected, the default temperature
of the selected program is displayed in the temperature indi-
cator. To adjust the temperature, press the temperature button.
The temperature will gradually increase and cycle to the lowest
when the maximum is reached.
If the programme has not reached the heating step,
you can change the temperature without switching the
machine to Pause mode.
4.7 Spin speed selection
Whenever a new program is selected, the default dehydration
speed of the selected program is displayed on the speed indicator.
To adjust the dehydration speed, press the speed button.
The rotation speed increases gradually and circulates to the
lowest when it reaches the highest.
• : Selectable
* : Automatically selected, no canceling.
ECO 40-60
40
Stain
60
Cotton
40
Down Wear
30
Woolen
30
Steam
90
20℃
20
Drum Clean
90
Smart
AUTO
•Wash+
In the standby mode, press the enhanced washing function
setting button,the Strengthen washing function indicator will
be on, and the Strengthen washing function will be added
in the washing process. After selecting the Strengthen washing
function, the washing time in the main washing stage will
be increased by 10 minutes, and the time after adding the
Strengthen washing function will be displayed in the remai-
ning time window. If you press it again, the Strengthen
washing function will be cancelled.
11
Max.
3.5
Max.
2
1.5
3.5
Max.
-
Max.
40
40-60
Cold-90
Cold-40
Cold-40
90
20
90
AUTO
Publicité
