Oase Filtral UVC 700 Notice D'emploi page 9

- English -
Closing the UVC water housing
Filtral UVC 700 / 1200
NOTE
For safety reasons, the UVC lamp can only be switched on when the unit
head has been correctly fitted into the casing
● Check the O ring (C) for damage.
1. Place the O ring (C) on the recess at the unit
head (A).
2. Carefully push the UVC water housing (B)
on the unit head (A) by applying medium
pressure.
● Simultaneously, slightly turn the UVC water
housing (B) to ensure that the tenons (D)
slide into the grooves (E) of the bayonet
closure.
3. Turn the UVC water housing (B) clockwise against the stop and allow to
engage. The engagement lug (F) will click back into the unit head (A).
NOTE
For an optimum filter performance, we recommend to replace the UVC lamp after approx. 8000 operating hours.
See section Replace UVC lamp before reassembling the unit.
Reassembling the unit
Filtral UVC 700
1. Attach the pump (B) to the UVC water
housing (A) using the union nut.
2. Insert fine foam filter (C) in the bottom
strainer casing (D).
● Place the bio surface elements (E) and
the gravel bag (F) in the bottom strainer
casing (D).
● Insert the UVC clarifying unit including
the pump (A,B).
● Insert the foam filter (G).
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
1.
C
1.
A
B
C
A
2.
B
3.
B
2.
G
A,B
C
G
D E
F
A
D
F
A
E
9