Oase Filtral UVC 700 Notice D'emploi page 3

- English -
Installation
Filtral UVC 700
Important:
● The unit can be used with the following:
○ With the nozzle set to create various fountain displays.
○ With the branch valve, allowing an additional water feature to be operated simultaneously with the fountain nozzle.
● It is recommened to place the unit horizontally on the ground ensuring its stable position.
● Do not lift the unit by its power cord.
● The unit's filter foam, biomedia, UVC and pump are preinstalled in the filter housing.
If NOT using the nozzle set
1. Screw the branch valve (D) on the connection thread of the UVC
water housing (A) using the washer (B). Close the upper outlet using
the cover cap (C).
2. Connect tubing for water features to the lateral separately regulated
connection of the branch valve.
NOTE: Tubing is NOT INCLUDED.
● Connect the other end of the tubing to desired water feature or spitter.
For installation using the nozzle set
1. Assemble the connection element for the ball joint (A) into the branch
valve (B).
2. Slide the clamping screw (D) down the tube and screw on to the
connection element for the ball joint (A) to secure the tube.
3. Screw in the nozzle mounting (E). Select a nozzle insert to use (F).
The fountain height and shape depend on the nozzle insert used.
4. Screw the assembly on the connection thread of the UVC water
housing (G) using the washer (H).
5. If desired, connect tubing for additional water features to the lateral
separately regulated connection of the branch valve.
NOTE: Tubing is NOT INCLUDED.
● Connect the other end of the tubing to desired water feature or spitter.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
C
1.
D
B
A
F
E
D
C
A
2.
B
H
G
2.
3