Publicité
10 | English
Technical Data
Angle Grinder
Article number
Rated voltage
A)
Rated speed
Speed adjustment range
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding spindle
KickBack Control
Restart protection
Run-out brake
Drop Control
Speed preselection
B)
Weight
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
C)
tion
and during storage
Compatible rechargeable batteries
Recommended rechargeable batteries
Recommended battery chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V 12.0Ah
B) Depends on rechargeable battery (5), protective guard ((11), (10)) and auxiliary handle ((8), (7)) in use
C) Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Kickback control
If there is a sudden kickback in the power tool,
e.g. jamming in a separating cut, the power
supply to the motor will be interrupted elec-
tronically.
To restart the tool, set the On/Off switch (3) to
the "off" position and then switch the power tool on again.
Restart protection
The restart protection feature prevents the
power tool from uncontrolled starting after the
power supply to it has been interrupted.
RESTART
PROTECTION
1 609 92A 9PD | (18.07.2024)
GWS 18V-11 S
GWS 18V-11 S
3 601 JN4 0..
3 601 JN4 0..
V=
18
–1
min
9000
–1
min
3000–9000
mm
100
M 10
mm
10
●
●
●
●
●
kg
1.9–3.1
°C
0 to +35
°C
–20 to +50
GBA 18V...
ProCORE18V...
ProCORE18V...
GBA 18V...
≥ 4.0Ah
ProCORE18V...
ProCORE18V...
≥ 4.0Ah
GAL 18...
GAX 18...
GAL 36...
To restart the tool, set the on/off switch (3) to the off posi-
tion and then switch the power tool on again.
Run-out brake
The power tool is fitted with an electronic run-
out brake. When the power tool is switched off
or the power supply is interrupted, the abras-
INTELLIGENT
ive tool is brought to a complete stop within a
BRAKE SYSTEM
few seconds.
Drop control
The integrated drop control switches the power tool off as
soon as it hits the floor. To restart the tool, set the On/Off
switch (3) to the "off" position and then switch the power
tool on again.
GWS 18V-11 S
3 601 JN4 0..
18
18
9000
9000
3000–9000
3000–9000
115
125
M 14
M 14
22
22
●
●
●
●
●
●
●
●
●
●
2.0–3.3
2.0–3.3
0 to +35
0 to +35
–20 to +50
–20 to +50
GBA 18V...
GBA 18V...
ProCORE18V...
GBA 18V...
GBA 18V...
≥ 4.0Ah
≥ 4.0Ah
ProCORE18V...
≥ 4.0Ah
≥ 4.0Ah
GAL 18...
GAL 18...
GAX 18...
GAX 18...
GAL 36...
GAL 36...
Bosch Power Tools
Publicité
