Publicité
Safety Warnings Specific for Wire Brushing
Operations:
• Be aware that wire bristles are thrown by the
brush even during ordinary operation. Do not
overstress the wires by applying excessive load
to the brush. The wire bristles can easily penetrate
light clothing and/or skin.
• If the use of a guard is recommended for wire
brushing, do not allow any interference of the
wire wheel or brush with the guard. Wire wheel
or brush may expand in diameter due to work load
and centrifugal forces.
Additional Safety Warnings
To reduce the risk of injury, when
•
WARNING
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always operate with two hands.
• Chemical Burn Hazard. Keep coin cell battery
away from children.
• If using with a lanyard, do not exceed maximum
capacity marked on the lanyard label. Always de-
termine the weight of the product, with all accesso-
ries, when selecting the appropriate lanyard system.
Exceeding maximum capacity may result in serious
injury. See specifications for tool and battery weight.
• Use only with MILWAUKEE energy absorbing
lanyards. Ropes, straps or chains may break
and cause failure. Do not use with lanyards at
full tension.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
FUNCTIONAL DESCRIPTION
1
10
9
1. Spindle lock
2. Handle
3. Dust screen
4. Lanyard
attachment
5. Switch lock-off
6. Paddle switch
7. Side handle
8. 7" Type 1 guard
9. Accessory
SYMBOLOGY
Volts
Direct Current
Rated Revolutions per Minute (RPM)
Do not use this type of guard for
cut-off operations.
Tool has RAPIDSTOP™ technology
ONE-KEY™
Read Operator's Manual
UL Listing for Canada and U.S.
5
2
3
5
6
7
8
11
12
10. Guard lock lever
11. Mode options
12. ONE-KEY™ LED
13. Mode select button
14. Spanner wrench
(not shown)
4
13
Publicité
