Function Menu; Playing Video Contents - Panasonic DMP-BDT100 Mode D'emploi

FUNCTION menu

Major functions of this unit can be operated from the
FUNCTION menu.
Press [3, 4] to select the item and press [OK].
Blu-ray Disc Player
FUNCTION MENU
BD-Video
Playback
Top Menu
Network
SD card
USB device
To Others
Playback
Top Menu
Menu
Viewing Picture
Viewing Video
Listening Music
Home
Network
(DLNA)
Network
Internet
Content
BD/DVD/CD
SD card
USB device
Playlists
To Others Setup
Card
Management
To exit the screen
Press [FUNCTION MENU].
≥ Items to be displayed may vary with the media.
≥ If FUNCTION screen is not displayed, press [FUNCTION MENU].
16
(16)
VQT2U34
OK
RETURN
Play back the contents.
( right)
( right)
( 21)
( right)
( 22)
( 23)
Displays the Home screen of
the VIERA CAST ( 22)
Switches to each drive.
You can play playlists created
on DVD-VR.
( 28)
( 18)

Playing video contents

BD DVD CD SD
Preparation
Turn on the television and select the appropriate video input
on the television.
1
1
Press [Í] to turn on the unit.
2
Insert the media.
Play starts.
≥ If the menu is displayed, press [3, 4, 2, 1] to select the
item and press [OK].
≥ When a message screen is displayed while playing back
3D compatible video software, play back in accordance
with the instructions.
≥ If play does not start, press [1] (PLAY).
∫ To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up
Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [OPTION] and
selecting "Pop-up Menu".
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
display information may change or will disappear from the
screen.
e.g.BD-Video
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
 T1
C1 0:05.14
Current position
≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is
output as "NTSC" or "PAL60". You can select "NTSC" or "PAL60" in
"NTSC Contents Output" for NTSC discs. (
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [∫] when you have finished playback to protect the unit's motor,
your television screen and so on.
≥ Depending on media and contents, the display may change or may not
appear.
≥ DivX: Successive play is not possible.
≥ When a menu is displayed at the time a 1080/60p (1920k1080/60
progressive) video recorded by a Panasonic digital high-definition video
camera is played back, select "Play Video (AVCHD)".
≥ It is not possible to playback AVCHD and MPEG2 video which have
been dragged and dropped, copied and pasted to the media.
USB
BD-Video
PLAY
0:20.52
Total time
28)