Télécharger Imprimer la page

Concept VP6250 Manuel D'emploi page 19

Aspirateur balai sans fil à batterie amovible

Publicité

EN
PRODUCT DESCRIPTION
1 Appliance body
2 Battery
3 Dust container
4 Dust container release button
5 Telescopic tube
6 Big turbo brush
7 Slot nozzle
8 Wall bracket
9 Slot nozzle with brush
15
7
10
14
18
19
13
8
36
10 Flexible hose
11 Small turbo brush
12 Flexible connection attachment
13 Charging adapter
14 Hardfloor brush
15 Carpet brush
16 On/off button
17 Display
18 Water tank
19 Cleaning cloths
12
11
9
2
16
1
17
3
4
5
6
DISPLAY DESCRIPTION
1. Blocked brush indicator
2. Battery status
3. Full container indicator
4. High power indicator
6
5. Power change button
6. Medium power
7. Low power
7
OPERATING INSTRUCTIONS
Vacuum cleaner assembly
Always disconnect the plug out of the electrical outlet before assembling or removing accessories!
1. Insert the suction tube into the hand-held unit of the vacuum cleaner, you will hear a click. To remove the tube from
the hand-held unit, press the lock button and pull to disconnect.
2. Insert the turbo brush into the suction tube, you will hear a click. To remove the turbo brush from the extension
tube, press the lock button and pull to disconnect. The turbo brush can be connected to the hand-held unit in the
same way.
BATTERY INSTALLATION
Insert the battery into the body of the hand-held unit and install it
to prevent it from coming loose. The battery is placed correctly when
you heard a sound. To release the battery, press the release buttons
and pull to disconnect.
Note: To extend battery life, keep the battery charged between 20%
and 80%. Do not store or recharge the appliance in environment with
temperatures below 0 °C or higher than 40 °C. These temperatures may
damage the appliance. During the charging process, the temperature
of the appliance may increase, this is normal.
If you do not use the vacuum cleaner for more than 3 months, allow
it to charge for 12 hours. Then place the vacuum cleaner in a dry and
cool place.
USE
Before installing the battery, check if it is fully charged.
1. Press the ON/OFF button to switch on the appliance.
2. Press the power button to switch to suction power.
3. Press the ON/OFF button again to switch off the vacuum cleaner.
Note: We recommend using the maximum power of the hand-held
unit in the case of a heavily soiled area or on carpets with medium
or high pile.
EN
1
2
3
4
5
37

Publicité

loading