Features; Assembly - Ryobi D47C Manuel D'utilisation

PRODUCT SPECIFICATIONS
Chuck ........................................................................
Switch .............................. Variable Speed Reversible
Clutch ..............................................................
KNOW YOUR DRILL AND CLUTCHDRIVER
See Figure 1, page 12.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BIT STORAGE
Bits provided with the drill can be placed in the storage area,
located on the handle of the drill.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
Your drill has a direction of rotation (forward/reverse) selector
located above the switch trigger for changing the direction
of bit rotation.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Drill and ClutchDriver
™
Double Ended Bits (2)
Tool Bag
Operator's Manual

FEATURES

3/8 in.
No Load Speed .................................0-1,200 r/min. (RPM)
(VSR) Input ...................................... 120 V, AC only, 60 Hz, 4.5 A
24 Positions Net Weight .............................................................. 3.8 lbs.
™
LEVEL
A level is located on the top of the motor housing to help
keep the drill bit level during use.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
TORQUE ADJUSTMENT RING
Your drill has a 24-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
7 − English