Publicité
Pulling on the cord again will switch on the larger, higher lamp (1200W). The
corresponding indicator light will come on.
Pulling on the pull-cord for a third time will switch on both lamps. Both indicator
lights will now come on and the heater will emit 2100W of heat.
Pulling on the pull-cord for a fourth time will switch the party-tent heater off. The
lights will go out.
These four settings will be repeated if you continue to pull the cord.
The following applies to both types
The party-tent heater is not equipped with a thermostat and will continue to emit
heat for as long as it is switched on. Never leave a functioning party-tent heater
unsupervised!
Remove the plug from the socket once the lights have gone off if you wish to
turn the device off.
Maintenance and cleaning
Switch the device off, remove the plug from the socket and leave to cool before
performing maintenance or cleaning.
Clean the exterior of the party-tent heater with a soft, damp cloth and, if
necessary, a little cleaning agent. Never use aggressive or abrasive products and
ensure that water never penetrates the device itself!
You will not usually need to clean the reflective screen or the carbon lamps. If
necessary, you could use a vacuum cleaner to suck dirt through the grille. If this is
inadequate, engage a professional. Never open up the device yourself!
Removal
CE-statement
See page 75.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
15
Publicité
