Publicité
Installation
1: standard attachment chain (50 cm)
2: extra attachment chain (30 cm) with 2 karabiner hooks
The party-tent heater must be hung so that there is 40 cm of free space between
the decorative cover and any ceiling, tent canvas etc.
Additionally, at least 50 cm of space must be left at the sides, between the device
and any side walls, tent canvas and other objects. There must also be at least 1.80
m between the ground and the underside of the control box. The party-tent heater
can never be hung on a hook in the wall as it could hang at a slant!
There are two methods of hanging:
1. On the ceiling
2. On a frame (e.g. a tent frame)
1. Hanging on the ceiling
The party-tent heater must be hung on a concrete ceiling. Never hang it on a
ceiling made of wood, plaster or any other material! The attachment materials and
fire safety measures are not suitable for this type of installation.
Seek a location in the ceiling that fulfils all of the requirements;
Drill a sufficiently deep hole with a diameter of
8 mm;
Knock the key-bolt with hanging eye into the
hole; secure it by turning clockwise and check
that the hanging eye is screwed into the key-
bolt properly or that the bolt and eye is firmly
attached. Ensure that the attachment kit can
bear the weight of at least 10 kg.
Hang the party-tent heater on the hanging eye
with the karabiner hook so that the party-tent
heater is 40 cm from the ceiling.
Check that the karabiner hook is correctly closed.
13
Publicité
