Accessories; Standard Accessories - Hitachi G 10SR Mode D'emploi Et Instructions De Securite

WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) For grinder supplied with Carrying Case
Wrench ................................................................................................................................. 1
(Code No. 936522 ....... G10SR)
(Code No. 938332Z ..... G12SR)
Side Handle (Code No. 318312) .......................................................................................... 1
Depressed center wheel ...................................................................................................... 1
4" (100mm) external dia. × 1/4" (6mm) thickness × 5/8" (16mm) hole dia.
4"-1/2" (115mm) external dia. × 1/4" (6mm) thickness × 7/8" (22mm) hole dia.
(2) For grinder supplied without Carrying Case
Wrench ................................................................................................................................. 1
(Code No. 936522 ....... G10SR)
(Code No. 938332Z ..... G12SR)
Side Handle (Code No. 318312) .......................................................................................... 1
Depressed center wheel (G10SR only) .............................................................................. 1
4" (100mm) external dia. × 1/4" (6mm) thickness × 5/8" (16mm) hole dia.
NOTE:
Specifications are subject to change without any obligation on the part of the HITACHI.

ACCESSORIES

Never use any accessories other than those mentioned below.
The use of any other attachment or accessory such as cup wheel or
cut-off wheel, etc. can be dangerous and could cause personal injury
or property damage.
(Code No. 701040) ....... G10SR
(Code No. 701045) ....... G12SR
(Code No. 701040)
English
15