Publicité
4 Set-up
4.4.2 Removing the product casing
A
C
B
▶
Remove the product casing as shown.
4.4.3 Installing the product
85
1
4
1
Mounting plate
2
Fixing points
1. Hold the mounting template against the
wall and mark the fixing points (2).
36
2. Use wall plugs and screws to secure
E
D
85
1
2
3
3. Fold the grommet up or down depend-
3
Cold water con-
nection
4
Domestic hot
4. Feed the cable through the grommet
water connection
Installation instructions electronicVED 0020288451_00
– Product alignment: Vertically on the
wall
the mounting plate (1) to the fixing
points.
Danger!
Risk of electric shock caused
by penetrating water
The grommet prevents wa-
ter from penetrating along the
power supply cable and into the
product.
▶
Never cut off the grommet
completely.
▶
Cut the end of the grommet
in such a way that the sleeve
tightly surrounds the power
supply cable.
ing on the location of the power supply
cable.
and into the product's interior.
Publicité
