Dump Box Lifting And Lowering Zi-Md500Hst; Maintenance Plan - Zipper Maschinen ZI-MD500HST Mode D'emploi

13.4.4 Dump box lifting and lowering ZI-MD500HST

 Pull the locking plate to the direction A and unlock the tipping
handle.
 To raise the dump box, pull the tipping handle up to the direction B.
The hydraulic system operates raising the dump box.
 To lower the dump box, pull the tipping handle down to the
direction C. The hydraulic system operations lowering the dump
box.
 When the dump box is lowered in original position lock the tipping
handle with the locking plate.
14 MAINTENANCE
No cleaning, upkeep, checks or maintenance when machine is running
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.

14.1 Maintenance plan

Loose or lost screws, nuts, bolts
Damage of any part of the machine
Fuel tank of tightness
Track checking
Machine cleaning
Lubricate the moving parts
Cleaning spark plug
Cleaning air filter
Oil level checking
ZIPPER MASCHINEN GmbH
ZI-MD500HST
Shut off the machine and let it cool down before start servicing!
Controls for the maintenance of the machine
www.Zipper-Maschinen.at
ATTENTION
NOTICE
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly after operation
Every 25 working hours
Every 25 working hours
Every 20-30 working hours
Every 50 working hours
MAINTENANCE
35