Publicité
Adjusting the Foot Bevel Angle (Fig. 6)
Your tool is equipped with quick-reference detent stops. The foot can be adjusted and locked
to cut only at bevel angles at 0° and ±45°.
Depress the lock-off button to the locked position, and then remove the battery pack from the
tool.
To adjust the foot:
a. Lift the foot-adjustment lever at the side of housing.
b. Move the foot slightly forward to disengage the locking tab.
c. Position the foot to the desired angle (0° or ±45°).
d. Push the foot backward to engage the locking tab and lower the foot-adjustment lever to
lock the foot at desired bevel setting.
After adjusting the foot, make a sample cut to check the angle.
Fig. 6
14
1
3
5
2
4
0º
6
45º
7
Publicité
