Publicité
INSTALLING THE LED ASSEMBLY AND BOTTOM COVER
Wire connectors
LED
assembly
Fig. 1
1
While holding the LED assembly under your fan, make the
polarized plug connections: (Fig. 1)
- White to white
- Blue to blue
NOTE: If you do not plan to install the LED assembly with your
fan at this time, don't make the wire connections.
2
Raise the LED assembly against the fan and turn clockwise
until snug, DO NOT OVERTIGHTEN. (Fig. 1)
3
Restore power and your LED assembly is ready for operation.
Wire connectors
Bottom
cover
Fig. 2
While holding the Bottom cover under your fan , don't make
4
the wire connections. (Fig. 2)
5
Raise the Bottom cover against the fan and turn clockwise
until snug, DO NOT OVERTIGHTEN. (Fig. 2)
©2024 Hinkley Lighting, Inc. | hinkley.com |
11
Publicité
