Publicité
INSTALLING THE BLADES
1
Remove blades screws from motor.
2
Fasten blade to motor with provided screws. Repeat
procedure for remaining blades. Make sure screws are
TIGHT! Loose motor screws can contribute to unnecessary
hum during operation.
NOTE:
Cordless power screwdrivers are
NOT
recommended,
as they usually strip the heads of the screws and usually
will not fully compress the lock washers on the motor
screws. Use a large flat blade screwdriver for final
Blades
tightening to fully compress the washers. This will help
ensure proper alignment of the blades and noise-free,
wobble-free running.
Screws
Screws
10
| hinkley.com
Publicité
