Télécharger Imprimer la page

Ovention MiLO Serie Manuel D'installation Et D'utilisation page 10

Publicité

OPERATION
5. Open the oven door. Using a paddle, pan gripper, or other
utensil, remove the cooked food product and close the
oven door. CAUTION! BURN HAZARD—Always use
a paddle, pan gripper, or other utensil to load and
unload food product.
•. The touchscreen will return to the Recipes screen.
NOTE: Touch
on the "DONE" screen to return to the
Recipes screen without opening the oven door.
Standby Shutdown
Use the following procedure to put each oven chamber into
standby shutdown during extended periods of non-use.
1. Touch
on each touchscreen to shut down operation and
put the oven in standby.
• The elements will shut off, and the Cooling screen will
appear on the touchscreen,
• The air blowers and cooling fans will continue to operate
until the oven chamber temperature drops below 140°F
(60°C).
• After the chambers are cool, the oven status will read
"Oven Off". After a period of time, the touchscreen will
darken to a screen saver.
Shutdown
Use the following procedure to disconnect the oven from power
for cleaning and maintenance as well as long term shutdown.
1. Touch
on each touchscreen to shut down operation and
put the oven in standby. Cooling fans will operate until the
oven chamber temperature drops below 140°F (60°C).
CAUTION
DO NOT turn off circuit
breaker(s) or unplug unit
immediately
after
Internal fans must cool oven
to avoid damage to electrical
components.
2. After the cooling fans shut
off:
a. Move the Circuit Breaker
switch(es) on the back of
the oven to the O (Off)
position.
b. Move the Control Reset switch(es) to the O (Off)
position.
c. Unplug the power cord.
Upper
Circuit
Breaker
"Off"
Lower
use.
Circuit
Breaker
"Off"
Control
Reset
Switches
"Off"
MiLO2-16 Controls
Shown
Programming Categories/Recipes
Use the following procedures to edit, create, or delete
categories and recipes. These procedures require access
to password-protected screens and should be performed by
authorized personnel only.
NOTE: The USB port allows the uploading of pre-programmed
recipes from an external USB drive. Refer to the
"Uploading from a USB Drive" procedure in this section
for details.
1. From the Categories screen, touch
• A password keypad will appear on the touchscreen.
2. Input the password "12345" , and touch
• The Settings screen will appear on the touchscreen.
Touch desired icon to
view/edit/create
corresponding setting.
Touch to return to
Categories screen.
3. Touch either EDIT CATEGORIES or EDIT RECIPES on
the Settings screen, depending on the desired function.
Then, refer to the appropriate procedure in this section.
10
English
.
.
Settings Screen
OVMILOM-0624

Publicité

loading

Ce manuel est également adapté pour:

Milo-16Milo2-16