Publicité
All manuals and user guides at all-guides.com
4.5- Adjusting the main grip handle (Fig.9)
The main handle can be pivoted by 90° to the left or to the right.
Raise and hold the locking button (5)
Pivot the main handle to the desired direction
Release the locking button (5) to fix the main handle.
Fig.9
V. OPERATION
5.1- Intended use
- The product is intended for indoor domestic use.
- The product is intended for polishing different types of materials (e.g. metals, marble...) by using
the appropriate accessory.
- Do not use the grinder for working on products containing asbestos or other toxic or hazardous
materials.
- Do not use the tool for purposes not appropriate (eg cutting of products containing hazardous
materials ...), or for any use not described in this manual.
- The tool is not intended for professional and / or industrial use.
- Do not use other types of disks other than those recommended by the manufacturer to avoid a
hazard.
This tool will allow you to polish various types of materials : metals, marble, plaster, concrete and
any other derived material.
5.2- Operation
5.2.1- Switching ON
Connect plug to power source.
Press the ON/OFF trigger switch (8).
5.2.2- Switching OFF
To switch off unit, release the ON/OFF switch (8).
Note: when switch is released, the disc continues to rotate.
Wait until it comes to a complete stop before any intervention or before putting down the tool.
Note: once unit is switched off, never slow down the disc by applying pressure on its faces.
5.3- Tips:
- Do not apply to much force on tool that could slow down the disc.
- To trim in an effective way, use trimming discs at a 30° to 40° angle to the material.
- For polishing: polish the surface in even circular motions.
Page 27 / 41
Publicité
