Publicité
With the Air-Velocity Adjustment Lever:
Start pulling the air-velocity adjustment lever
•
backward (towards the handle) to turn on the
blower without touching the trigger switch.
(Fig. 6a)
As the air-velocity adjustment lever is pulled
•
backward, you will see that the variable-
speed trigger switch is depressed, and the air
speed is simultaneously increased.
The air-velocity adjustment lever will stay
•
in the position where you release it and
keep the air speed without a need to press
anything.
Boost mode:
•
Your blower can only reach its maximum air
velocity by pulling the air-velocity adjustment
lever all the way backward to the "BOOST"
position and holding it (Fig. 6b).
NOTE: The maximum speed cannot be
reached by pressing the variable-speed trig-
ger switch.
Release the air-velocity adjustment lever
from the "BOOST" position, the lever will
bounce back to the "TOP" position and the
machine will return to the top air velocity that
can be achieved by fully pressing the vari-
able-speed trigger switch (Fig. 6c).
Push the air-velocity adjustment lever all the
•
way forward (towards the blower tube) to turn
off the blower.
The air-velocity adjustment lever
NOTICE
must be always pushed all the
way forward before turning off the blower.
WARNING
blower during work breaks and after
finishing work.
14
Always remove the
battery pack from the
Fig . 6a
Fig . 6b
BOOST Mode
Fig . 6c
TOP
Air-Velocity
Adjustment Lever
Publicité
