Publicité
(25), blade and bowl cover first;
4)
When using, lock the bowl cover (18) tightly;
5)
When using, do not foist the finger or othe
6)
Before the blender blade comes to a fu
(26) or conduct any other opera
7)
After m
incing the food, the meat mincing bowl shall be removed from the main body before the meat mincing bowl cover (18)
is opened and the food is taken out;
8)
After using, the meat mincing bowl shall be cleaned and air-dried and the blades shall be pu
3.Operation metho
ds
Slicing up:
2)
Put the main shaft (25) and slicing blade tray (22) into the meat mincing bowl; (as showi
3)
Press the blender cover tightly to its appoin
bowl onto the main body (10), (as shown in following figure)
4)
Turn the speed switch (9) to start the appliance and adjust the
the hole in meat mincing bowl cover (18) and push down the fruits with the food pusher (19); (as
shown in the right figure)
5)
Turn the speed switch (9) to'O'to stop the device and unplug the power cord.
6)
When the appliance comes to a full stop, screw out and remove the meat mi
bowl cover (18) and take the slicing blade tray (22) out, then pour the sliced fruits out onto a
your enjoyment;
* The thickness of the fruit slice is adjustable: when you need to adjust the thickness, turn the blade button (23) a
slicing blade tray (22) to choose the thickness of fruit slice freely. You can turn
the blade button (23) 1-9 grades along the direction as shown by the arrow in the
figure. With the increase of every one grade, the thickness will increase by about
0.
7mm and the maximum slice thickness is 6.4mm.
Shredding of fruit:
The
shre ding methods are same with those of slicing; what's different is that there
d
hin hredding blade (20) and thick shredding blade (21) as options; please refer
are t
s
to the rig
ht figure for blade changing; the speed can be grade 3-4; after shredding, turn the
speed swi
tch (9) to'O'to stop th
r article into the hole on bowl cover (18), lest the occurrence of any accident.
ll stop, do not open the meat mincing bowl cover (18) o
tion on the meat mincing bowl;
ted position, locked the meat mincing bowl cover (18) and install the meat mincing
e device and unplug the power cord.
r remove the meat mincing bowl
t in a safe place for proper keeping
ng in the right figure)
speed to grade 3-4; foist fruit from
ncing bowl, op
en the
dish for
t the back of
Publicité
