Publicité
Removing Clogs
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢ Unplug vacuum.
Hose
Tuyau
➢ ➢ Pull open suction inlet cover and
Manguera
Cover
(Suction Inlet)
Couvercle
➢ ➢ Disconnect wand from short hose
(entrée
d'aspiration)
Cubierta
(Abertura de
aspiración)
➢ ➢ Plug in vacuum cleaner and turn on.
Short Hose
Tuyau court
Manguera
corta
➢ ➢ Disconnect wand and stretch hose in
➢ ➢ If clog still exists, turn vacuum
➢ ➢ Remove lower plate.
Short Hose
➢ ➢ Remove short hose from nozzle by
Tuyau court
Manguera
corta
➢ ➢ Inspect hose end and clear any
➢ ➢ Reinstall short hose and lower plate.
- 36 -
check for clogging.
and check wand and hose.
and out to remove clog.
cleaner OFF and UNPLUG POWER
CORD.
lifting straight up.
obstructions.
Power
Tools on Board
120V AC(60Hz)
Tableau des c
Alimentation
Accessoires
120 V c.a. (60 Hz)
Diagrama de c
Voltaje
Herramientas
incluídas
120V AC(60Hz)
FEATUR
Yes
Oui
Si
- 1
Publicité
