Publicité
en
18
Mounting application tools
(figure 6).
Release the clamping lever and tilt it to the
stop.
Pull out the fastening element.
Clean the tool holder, the application tool
and the fastening element.
Fig. 6
Fastening element
2.
Clamping lever
1.
1.
180°
3.
4.
180°
Cover
2.
Insert the application tool accurately onto
the tool holder. Pay attention that the appli-
cation tool is mounted flush.
When changing application
CAUTION
tools with sharp cutting
edges, use cover to protect yourself against
hand injuries.
4.
3.
180°
5.
6.
5.
8.
180°
Fastening element
Application tool
Fastening element
Application tool
Cover
7.
Publicité
