Publicité
1
English
GENERAL INFORMATION (FIG.1)
3.1
Use of the manual
EN
this manual forms an integral part of the appliance
and should be kept for future reference. Please read
it carefully before installing/using the unit. if the
appliance is sold, the seller must pass on this manual
to the new owner along with the appliance.
3.2
Delivery
the appliance is delivered partially assembled in a
cardboard box.
the supply package is illustrated in fig.1.
3.2.1 Documentation supplied with the appliance
A1 use and maintenance manual
A2 safety instructions
A3 Declaration of conformity
3.3
Disposing of packaging
the packaging materials are not environmental pol-
lutants but must still be recycled or disposed of
in compliance with the relevant legislation in the
country of use.
3.4
Safety signs
comply with the instructions provided by the safety
signs fitted to the appliance.
check that they are present and legible; otherwise,
fit replacements in the original positions.
e1 sign – indicates that the appliance must not be
disposed of as municipal waste; it may be handed
in to the dealer on purchase of a new appliance.
the appliance's electrical and electronic parts must
not be reused for improper uses since they contain
substances which constitute health hazards.
3.4.1 Symbols
e2 symbol – indicates that the appliance
is intended for professional use, i.e. for
experienced people informed about the
relative technical, regulatory and legisla-
tive aspects and capable of performing
the operations necessary for the use and
maintenance of the appliance.
e3 symbol – indicates that the appli-
ance is intended for non-professional
(domestic) use.
TECHNICAL INFORMATION (FIG.1)
4.1
Envisaged use
this appliance has been designed for individual
use for the cleaning of vehicles, machines, boats,
masonry, etc, to remove stubborn dirt using clean
water and biodegradable chemical detergents.
Vehicle engines may be washed only if the dirty
water is disposed of as per regulations in force.
- intake water temperature: see data plate on the
appliance.
- intake water pressure: below 10 bar.
- operating ambient temperature: above 0°C.
the appliance is compliant with the eN 60335-2-
79/a1 standard.
4.2
Operator
the symbol on the front cover identifies the appli-
ance's intended operator (professional or non-pro-
fessional).
4.3
Improper use
use by unskilled persons or those who have not read
and understood the instructions in the manual is
forbidden.
the introduction of inflammable, explosive and toxic
liquids into the appliance is prohibited.
use of the appliance in a potentially inflammable or
explosive atmosphere is forbidden.
the use of non-original spare parts and any other
spare parts not specifically intended for the model
in question is prohibited.
all modifications to the appliance are prohibited.
any modifications made to the appliance shall ren-
der the Declaration of conformity null and void and
relieve the manufacturer of all liability under civil
and criminal law.
4.4
Main components
B1
adjustable spray nozzle
B2
Lance
B3
gun with safety catch
B4
Power supply cable with plug
B5
high pressure hose
B6
Detergent tank (on models with this fea-
ture)
4.4.1 Accessories (where applicable – see fig.1).
C1 Nozzle cleaning tool
C2 rotating nozzle kit
C3 handle
C4 Brush
C5 hose reel
4.5
Safety devices
Caution - Danger!
Do not tamper with or adjust the safety valve set-
ting.
- safety valve and pressure limiting valve.
the safety valve is also a pressure limiting
valve. When the gun trigger is released,
the valve opens and the water recirculates
through the pump inlet.
- safety catch (D): prevents accidental spraying
of water.
INSTALLATION (FIG.2)
5.1
Assembly
Caution - Danger!
All installation and assembly operations must be
performed with the appliance disconnected from the mains
power supply.
the assembly sequence is illustrated in fig.2.
5.2
Assembling the rotating nozzle
(For models with this feature)
the rotating nozzle kit delivers greater washing
power.
5.3
Electrical connection
Publicité
