Publicité
3.
Load laundry into washer
Load garments in loose heaps evenly
around basket wall. For best results, do
not pack the load tightly. Do not wrap
large items, such as sheets, around the
agitator; load them in loose piles around
the sides of the basket. Try mixing
different-sized items to reduce tangling.
IMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling. Load heavier items in first. Do not load
above agitator cap. Do not load clothes above white inner collar.
4.
Add liquid chlorine bleach
to dispenser
Liquid
Chlorine Bleach
Do not overfill, dilute, or use more than 1 cup (236 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
6
5.
Add fabric softener to dispenser
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer's directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches
the underside of the rim. See Max Fill line arrows.
Adding Liquid Fabric Softener Manually to Wash Load
During the final rinse, wait until the washer has completed filling.
At that time, water valve will shut off and you will not hear any
water entering the washer. Lift the lid and add the measured
recommended amount of liquid fabric softener. Do not use more
than the recommended amount. Close lid.
6.
Select WATER LEVEL
Select the water level appropriate for the amount of clothes
you will wash with this cycle. Smaller loads use the Low or
Medium water levels while larger loads use the High or Deep
Water water levels.
MAX FILL
Publicité
