Sage the Nutri Juicer Classic Guide Rapide page 4

Assembly
Before first use
Before using your juicer for the first time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the appliance is switched OFF at the
power outlet and the power cord is unplugged.
Wash the filter bowl surround, filter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with a soft
cloth. Rinse and dry thoroughly. The motor base
can be wiped with a damp cloth. Dry thoroughly.
1. Place motor base on a flat, dry surface such
as a bench top. Ensure that the motor base
is switched OFF at the control panel, then
switch the appliance off at the power outlet
and unplug the power cord.
2. Place filter bowl surround on top of
the motor base.
6
3. Align the arrows at the base of the stainless
steel filter basket with the arrows on the motor
drive coupling and push down until it clicks
into place. Ensure the stainless steel filter
basket is fitted securely inside the filter bowl
surround and onto the motor base.
FILTER BASKET
CAUTION:
SHARP BLADES
WARNING
The stainless steel filter basket contains
small sharp blades to cut and process fruit
and vegetables. Avoid touching the blades
when handling the filter basket.
4. Place the juicer cover over the filter bowl
surround, positioning the feed chute over
the stainless steel filter basket and lower
into position.
5. Raise the safety locking arm up and locate
into the two grooves on either side of the
juice cover.
The safety locking arm should now
be in a vertical position and locked
into place on top of the juice cover.
6. Slide the food pusher down the food chute
by aligning the groove in the food pusher,
with the small protrusion on the inside
of the top of the feed tube.
FOOD
PUSHER
GROOVE
SMALL
PROTRUSION
INSIDE FEED
Continue to slide the food pusher down
on the feed chute.
7. Place the pulp container into position by tilting
the motor base slightly to the right. Insert the
pulp container under the juicer cover on the
left hand side ensuring it is supported by the
juicer cover and motor base.
NOTE
To minimise cleaning, line the pulp container
with a plastic freezer bag to collect the pulp.
Pulp can be used in other dishes, or as
a compost for the garden or discarded.
8. Place the juicer jug under the juice spout on
the right hand side of the juicer. The juice jug
lid can be used to avoid any splatter.
EN
7