INSTALLATION
fireplaces or other heating appliances, smell, do
not operate properly, suffer smoke roll-out when
opened, or back-drafts occur whether or not there is
combustion present.
3. Opening a window slightly on a calm (windless) day
alleviates any of the above symptoms.
4. The house is equipped with a well-sealed vapor barrier
and tight fitting windows and/or has any powered
devices that exhaust house air.
5. There is excessive condensation on windows in the
winter.
6. A ventilation system is installed in the house.
Slide the hose clamp over the aluminium flex pipe. Then
slide the flex pipe over the air intake tube of the stove.
Next tighten the hose clamp over the end of the aluminium
flex hose.
FOR
USE
IN
MOBILE
BUILDINGS
• WARNING! DO NOT INSTALL IN SLEEPING ROOM.
• CAUTION! THE STRUCTURAL INTEGRITY OF
THE MOBILE HOME/TRANSPORTABLE BUILDING
FLOOR, WALL, AND CEILING/ROOF MUST BE
MAINTAINED.
• USE A FACTORY BUILT CHIMNEY THAT COMPLIES
WITH UL 103 STANDARDS; THEREFORE IT MUST
BE A TYPE HT (2100°F).
• USE A SPARK ARRESTER.
• THE
STOVE
MUST
THE
STRUCTURE
TRANSPORTABLE BUILDING.
HOME/TRANSPORTABLE
BE
ATTACHED
OF
THE
MOBILE
HOME/
SECURING APPLIANCE'S ON A PEDESTAL
TO THE FLOOR
Use the designated holes to secure the unit to the floor.
SECURING APPLIANCE'S WITH LEGS TO THE
FLOOR
1. The bracket engages around the square extrusion of
the leveling bolt inserted into the leg.
2. Once appliance is leveled, position the bracket and
attach to the floor using the appropriate hardware
needed for your specific flooring.
3. Install one bracket per leg or consult your local
authority having jurisdiction to determine how many
points of attachment are required.
In addition to the previously detailed installation
requirements, the heater must be electrically grounded
to the steel chassis of the mobile home/transportable
building with 8 GA copper wire using a serrated or star
washer to penetrate paint or protective coating to ensure
grounding.
TO
CHIMNEY CONNECTOR (STOVE PIPE)
The chimney connector and chimney must have the
same diameter as the stove outlet (6"). If this is not the
7
© 2024 United States Stove Company