Publicité
General precautions
• Read the instructions carefully before beginning the installation and carry out the actions as specifi ed by the manufacturer. •
The installation, programming, commissioning and maintenance of the product must only be carried out by qualifi ed technicians,
properly trained in compliance with the regulations in force, including health and safety measures and the disposal of packaging. •
Before carrying out any cleaning or maintenance operation, disconnect the device from the power supply. • The equipment must
be destined solely for the use for which it was expressly designed. • The manufacturer declines all liability for any damage as a
result of improper, incorrect or unreasonable use. • The product, in its original packaging supplied by the manufacturer, must only
be transported in a closed environment (railway carriage, containers, closed vehicles). • If the product malfunctions, stop using it
and contact customer services at https://www.came.com/global/en/contact-us or via the telephone number on the website.
The manufacture date is provided in the production batch printed on the product label. If necessary, contact us at https://www.came.
com/global/en/contact-us.
The general conditions of sale are given in the offi cial CAME price lists.
Legislative references
This product complies with the applicable standards in force at the time of manufacturing.
Functions
A
5 5
4 4
DATI
PROG
3 3
BOUT
M1
A A
Terminal board 1
+
14-18 VDC power supply
–
BOUT Busbar
Terminal Board 2
Solenoid lock
12 V - 1 A max
–
Door release button (NA)
Door open contact input (NC)
8 8
MINI USB
7 7
CN4
I I
M2
2 2
CN2
6 6
–
Ground
System output (active to ground)
–
Ground
Attention. For Manual programming of the Entry Panels the
self-connection order is BIN1-BIN2-BIN3.
PROG key 3 and PROG LED 4
Programming key and LED (see 'Programming' paragraph). The
PROG LED can be in the following conditions:
Off
On
Flashing slowly
Flashing quickly
Adjustments 5
Speaker audio
microphone audio
solenoid lock 1÷10 s. (default 1 s)
Connectors
6 CN2: Connector for the unit controlling access to keypad or
RFID.
7 CN4: Connector for possible connection of an additional
keypad
8 MINI USB: Connector for programming from PC
Messages 9
Red - Call in progress
Green - Door open
Yellow - Conversation in progress
Blue - System busy
Publicité
