Publicité
3. Intended Use
The dirty water pump is intended for private use, e.g. in a hobby garden. The product is not intended for operation of
irrigation or irrigation systems in commerce, industry or public areas (e.g. garden facilities).
Clean/contaminated non-saline fresh water are admissible as conveyed liquids. The conveyed liquid must not be hot-
ter than +35 °C. The maximum permissible grain size must not be exceeded. Refer to
"15. Technical Data" on page
30
for details.
The dirty water pump is used for recirculate/drain containers (rain water cistern), water supply of suitable devices in
the garden via a house well (ground water) or pumping off water, e.g. from a swimming pool. The dirty water pump is
also suitable for draining after flooding or for temporary water recirculation of ponds.
An external float switch activates the dirty water pump automatically when the water level rises. The float switch can,
however, be attached to the dirty water pump side if not in use.
These operating instructions must be passed on to any person who uses the dirty water pump. The dirty water pump
must only be used if these operating instructions have been read and understood. The safety notes and all other
information in these operating instructions always have to be observed.
Any use other than that described above can damage the product and may involve additional risks such as short
circuit, fire, electric shock, etc. No part of this product must be modified or converted!
This product complies with the statutory national and European requirements. All company names and product names
are trademarks of their respective owners. All rights reserved.
4. Scope of Delivery
• Dirty water pump
• L-shaped pipe piece
• Hose connection
• Operating instructions
5. Operating Instructions for download
Use the link
www.conrad.com/downloads
(alternatively scan the QR code) to download the com-
plete operating instructions (or new/current versions if available). Follow the instructions on the
web page.
19
Publicité
