Publicité
8. Select
CYCLE*
NORMAL
COLDWASH
--
--
WHITES
DELI_
__
HEAVY
DUTY
QUICK
WASH
TOWELS
WASH &
ALLERGEN
DRAIN
& SPIN
--
SANITIZE
CLEAN WASHER with
Turn cycle knob to select your wash cycle. See "Cycle Guide"
for details on cycle features.
f
9. Adjust settings,
if desired*
[
--.Ad _ _l_y T_me_ 1_ ........ J
Fan Dry
Extra Rinse
Cycle Signal
Control
Lock
The display will show the default settings for the selected
cycle. To adjust a setting, touch its name - Wash Temp, Spin,
Soil, or PreSoak. Adjusting settings will change the Estimated
Time Remaining. Tightly packing the load, unbalanced
loads,
or excessive suds may also cause the washer to increase the
cycle time.
You can also adjust the detergent concentration
and water
hardness settings, if needed. Default settings are 2x detergent
concentration
and normal water hardness. If the detergent
concentration
is not listed on the package, see "About
Detergent Concentration"
to calculate the concentration.
To Adjust Dispenser Settings:
1. Touch DETERGENT CONCENTRATION
until the desired
concentration
appears on the time display.
2. Touch WATER HARDNESS until the desired water hardness
appears on the time display.
f
1 0. Select
any additional
options*
!.iii:_Stea m Clean
_EcoBoost
L
--.Adustl)elayTtne_
Fan Dry
Extra Rinse
Cycle Signal
Control
Lock
forDrumLgh_
_orButton5ound_
To add an option to the cycle, touch its name - Steam Clean,
EcoBoost
TM,
Fan Dry, Extra Rinse, Cycle Signal, or Control Lock.
To remove an option from the selected cycle, touch the option
again.
1 1. Setting
a delayed
wash
--
+
--
Adjust
Delay
Time--
If you do not want to begin a cycle immediately, you may
choose the Delay Wash option. This will delay the start
of the wash cycle by up to 12 hours.
To set a delayed Start:
1. Touch ADJUST DELAY TIME + or - to set the desired delay
time.
2. Touch START to start the delay countdown.
The countdown
stops blinking.
12
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
Publicité
