Publicité
To begin pumping
1 Use the original USB cable, and connect your pump to the USB port. This
appliance does not contain a supply unit. To power the appliance, only use
a supply unit with output rating of 5 V
supply unit to the power socket.
2 Press the assembled pump bodies against your breasts. Make sure that
your nipples are centered, so that the massage cushion creates an airtight
seal. Make sure that no air escapes; otherwise there is no suction.
3 Press the power button (
»
The display panel lights up for 1 second. The breast pump
automatically starts up with the lowest level to stimulate, and you will
feel suction on your breast. The stimulation indicator lights up. The
appliance has the memory function to remember the levels for both
stimulation and expression mode in your latest usage.
4 You can choose your desired level by pressing the
level up (
) and level down (
can also press the mode button (
between stimulation mode and expression mode to
get the best pumping effect.
»
There are 4 levels for stimulation and expression.
You can press the level up button to deeper the
suction. Press the level down button to lower
the suction. The number of lights will increase or
decrease according to the level selected.
Note
• You do not need to use the biggest expression level, only use the levels that are comfortable for you.
, ≥ 1 A. And then, connect the
) to switch on your pump.
) buttons. You
) to switch
English 6
2
1
Publicité
