Danby DH016A1W Mode D'emploi page 11

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time
during this process, it must be allowed to remain upright for 6 hours
before plugging it in to avoid damage to the internal components.
To change the direction of the door swing, follow the instructions below.
1. Remove the adjustable foot from the lower left side of the cabinet.
Remove the lower hinge from the lower right side of the cabinet.
Remove the solid foot from the lower right side of the cabinet.
2. Remove the door from the cabinet. Unscrew the upper hinge pin from
the upper right side of the worktop and install it on the upper left side
of the worktop.
3. Install the door on the cabinet. Install the lower hinge on the lower
left side of the cabinet. Install the adjustable foot on the lower right
side of the cabinet. Install the solid foot on the lower left side of the
cabinet. Remove the door handle from the left side of the door and
install it on the right side of the door.
1
2
3
11