Publicité
OPERATING INSTRUCTIONS
6. Laying the refrigerator on its back, take out
the adjusting feet and unscrew the lower hinge
using the phillips screwdriver.
7. Unscrew and remove the bottom hinge pin, turn
the bracket over and replace it.
8. Refit the bracket fitting the bottom hinge pin.
Replace both adjustable feet. Transfer the lower
door to the proper position.
9. Make the middle hinge reverse the direction
180°, then transfer it to the left position. Place
the middle hinge pin in the upper hole of the
lower door, then tighten the screws.
10. Unscrew the right middle stopper with metal
block from the bottom of the upper door. Install
the left middle stopper and metal block in the left
side of the bottom of the upper door.
11. Install the upper door with the upper hinge.
12. Install the hinge cover and hole cover on the top
of the appliance.
6
Publicité
