Publicité
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side during this process it must be allowed to stand upright for 6
hours before plugging in to avoid damage to internal components.
Before reversing the door, please be prepared with the following tools and materials:
Straight screwdriver, cross (phillips) screwdriver, spanner and components included in the poly bag.
1. Carefully remove the top hinge cover with a flat
screwdriver.
2. Unscrew the top hinge with a phillips
screwdriver.
3. Remove the hole cover with a flat screwdriver.
4. Move the core cover from the left side to the
right side. Lift the upper door and place it on a
padded surface to prevent it from scratching.
5. Unscrew the middle hinge using a phillips
screwdriver and take off the lower door.
5
Publicité
