Publicité
BMW INJECTOR NOZZLE PTFE JOINT ASSEMBLY/
OM 9379
DISASSEMBLY TOOL
DESCRIPTION
Specially designed for replacing BMW injector nozzle joints.
Contents:
• worn joint removal plier
• 2 new joint fi tting tools
• 5 new joint installation guides
Applications:
N13, N14, N18, N20, N26, N43, N53, N54, N55, N63, N74, S55, S63, B38, B48
OEM codes:
130191,130281,130282,130283
INSTRUCTIONS
Installation
When reusing the fuel injector:
Replace the decoupling element (1).
Replace the PTFE sealing ring (2).
A PTFE gasket installed in the cylinder head must be
replaced before reinstalling the injector.
Replacing the PTFE sealing ring
Before replacing the PTFE seal (1), make sure that the
hands and work surface are clean and oil-free.
Avoid any mechanical contact with the tip of the injector
(2).
Publicité
