Publicité
INSTRUCTIONS FOR CONVERSION
1.
If fireplace is installed, turn OFF gas and electric supply to
fireplace before making gas conversion. Allow fireplace to
cool completely.
2.
Remove barrier screen, glass door, logs and embers, and
liners. (See Homeownerʼs Manual, Log Set Instructions,
and Liner Instructions.)
3.
Remove front and rear burners by removing screws on left
and pulling out towards left side. See Figure 2.
1
4.
Remove (2) screws holding pilot assembly to burner pan.
This will allow pilot assembly to drop. See Figure 3.
Page 2
Figure 1
2
Figure 2
Figure 3
Empire Comfort Systems Inc. • Belleville, IL
5.
Remove (2) screws holding burner base in place. Lift burner
base out of firebox. See Figures 4 and 5.
6.
Use a 7/16 inch deep socket wrench to remove orifices.
See Figure 6.
Figure 4
Figure 5
ORIFICE
Figure 6
41346-1-0220
Publicité
