Publicité
Motor stops
Increased
vibration
18
Engine ran too
hot, overheating
protection triggered
Foreign body or
blockage blocks the
striking mechanism
Foreign body in
the percussion
mechanism
Loose screw
connections
Wait a few minutes until the appliance has
cooled down again and restart it.
Switch off the appliance and disconnect
the mains plug from the socket. Open the
appliance, remove the sieve and check
for foreign bodies or dirt. If there is any
damage, replace the parts with original
spare parts.
Switch off the appliance and disconnect
the mains plug from the socket. Open the
appliance, remove the sieve and check for
foreign objects.
Switch off the appliance and disconnect
the mains plug from the socket. Open the
appliance, remove the sieve and check
whether the screw connections on the
motor, beater mechanism or sieve are
loose. Tighten everything if necessary.
V. 1.2
EN
Publicité
