Publicité
For packaging reasons, this machine is not fully assembled. The parts to be
Risk of injury! Make sure that the appliance is switched off and the mains plug
is not plugged in.
Fitting the screen and the feet
A strainer is already fitted at the factory; if a different one is required, replace it.
The scope of delivery includes five sieves with which you can vary the degree
of grinding. To change, always switch off the appliance and pull the mains
plug out of the socket!
1.
First unscrew the two nuts on the strainer and remove the strainer. Then replace the
desired strainer in the same way and tighten the nuts. (Fig. 2)
If the screws are not tightened sufficiently, they may come loose and damage
the appliance. The strainer screws must therefore be checked and tightened
before each start-up.
Hexagon nut
12
Assembly
fitted are included in the packaging.
Figure 2
Hexagon nut
V. 1.2
EN
Publicité
