Publicité
Electrical safety
• If you want to extend the connecting cable, only use extension cables that are suitable
for outdoor use. This measure reduces the risk of electric shock.
• Never use the connecting cable for any other purpose than to carry or hang up the
appliance or to pull the plug out of the socket.
• Keep the cable away from heat, oil, sharp edges or moving appliance parts. Never
pinch, kink, crush or knot the cable under the appliance. Always roll out the cable
completely. Never immerse the cable in water or other liquids. Damaged, wet or
entangled cables increase the risk of electric shock.
•
Onlyuse the appliance when all connections are dry and secure. Ingress of water into
and onto the appliance increases the risk of electric shock.
• The socket outlet used must be equipped with a residual current circuit breaker (RCD).
Dangers due to high temperatures
• The appliance, especially the electric motor, becomes very hot during operation. Never
cover the appliance during operation. Never block the cooling fins of the motor.
Hazards due to rotating parts
• Never insert objects inside the housing.
• Never operate the appliance with the cover open or loose.
• Never work on moving parts of the appliance.
Pull out the mains plug:
• After the cooling phase.
• During maintenance.
• When you are not using the device.
• Before cleaning the appliance.
• Before each transport.
EN
V. 1.2
9
Publicité
