Publicité
Ensure that only dry material is introduced for grinding. Moist/wet ground
material leads to clogging and risk of damage to the appliance!
Risk of damage to the appliance and risk of injury. The appliance must not be
used to work on wood, plastic or metal objects.
Check all imported grinding materials for foreign objects beforehand.
If the fastening screws for the grinding sieve are not tightened sufficiently,
they may come loose and damage the appliance. The strainer screws must
therefore be checked and tightened before each start-up.
• All devices are checked for function before packing. Nevertheless, make sure that all
screw connections are tight and not loose before using the appliance for the first time.
• Put on your personal protective equipment.
• Place the appliance on a level, firm and dry surface.
• Fill the appropriate ground material into the hopper. The ground material must not be
damp or wet and must not contain any hard foreign bodies.
• Insert the mains plug into a standard and undamaged socket.
• Switch the device on using the "On/Off switch". Never open or unlock the collection
container while the appliance is in operation.
• Switch the appliance off immediately with the "On/Off switch" when the ground
coffee is completely ground.
The appliance is equipped with overheating protection. If the motor runs too
hot, it switches off automatically. In this case, simply wait a few minutes and
restart the device.
Products processed with this appliance are not suitable for human consumption.
14
Commissioning
V. 1.2
EN
Publicité
