Publicité
3 Setting up the VoIP communication
your browser, making sure that the system running the browser is on the same network as
the PEAKnx Touch Panel. To do this, enter the following URL in your browser:
−
http://x.x.x.x:31228, where x.x.x.x must be replaced by the local IP address of your PE-
AKnx touch panel. This is displayed in the lower part of the YOUVI Dashboard App.
3.
From the menu on the left, select "Cameras".
4.
Use the "+" symbol to add a new camera set.
5.
Click the "+"-Symbol next to "Select Camera Stream" to create a new camera stream.
6.
For the "Stream Name", enter an appropriate name of your preference.
7.
Set the Stream Type to "MJPEG".
8.
Enter the link of the camera stream from your door station under "Low Resolution URL" as
well as under "High Resolution URL". You can find it on the AGFEO configuration website
under Video.
9.
Click "Save" to register the settings with your PEAKnx touch panel.
10.
Within the PEAKnx Touch Panel, switch back to YOUVI Visu
11.
In order to ensure that the visualization is automatically activated when the system is reboo-
ted, open the YOUVI Visu settings under Auto start and activate this feature.
12.
Now switch on the "Edit Mode" and switch to the Dashboard.
13.
Select the "Webcam" button to select a Camera created in YOUVI Configuration.
23
Publicité
