Publicité
2 Setting up the AGFEO door intercom
2 Setting up the AGFEO door intercom
1.
Connect the AGFEO device to a PoE-enabled switch or the network and a power supply
and write down the IP address displayed during startup.
2.
Enter the IP address in the browser to configure the AGFEO door station.
3.
The default password is "admin".
4.
Under SIP Configuration, enter the IP address of the SIP server or fritz.box as the Server.
As Username, Authentication name and Password, select the user data which you have
assigned for the AGFEO door station in the Fritzbox or the Tek-SIP software and click on
"Apply".
−
You can also find your credentials under fritz.box > Telephony Devices if you edit the
created AGFEO door intercom and go to the tab "Login data".
5.
If the registration with the server was successful, the status shows green.
18
Publicité
