Publicité
3 Setting up the VoIP communication
22.
To test these settings, press the door bell on your door station. The door station widget
opens on the panel:
Functions of the widget:
Before accepting the call: accept video call from the door station, reject, or open the door
■
directly
After accepting the call: make video call, open door, mute, end call, deactivate camera
■
image
Select a ringtone of 5 predefined tunes or upload a ringtone in the tile settings of the Door
■
intercom widget
Define the duration of the ring tone in the tile settings of the Door intercom widget
■
The widget closes automatically 3 seconds after the door is opened.
■
Video transmission in MJPEG, JPEG and RTSP
■
3.2 Option 2: Setting up the YOUVI camera module
Notes on the camera stream
On the configuration page of the door station you will find various links under Video to use the
camera image of the door intercom as a video stream. You can also enter the resolution and
refresh rate here to avoid overloading your network with the stream.
To make use of the AGFEO Door Station's camera, it needs to be added and set up within
YOUVI Configuration.
1.
To add the camera module open YOUVI Dashboard on the panel and select Install Camera
Device. If you do not have a full license yet, you can purchase it in the PEAKnx Shop.
2.
Switch to YOUVI Dashboard > Camera Device OR open the configuration page at a PC in
22
Publicité
