Publicité
3.2.
Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded and
correspond to the technical details on the product label!
3.3.
Device use
How to use:
1.
Place a filled pot, etc. centrally on the hob.
2.
Connect the device to a power source and switch it on by pressing the On / Off button. The LED above the
button lights up.
3.
Set the temperature, heating power and, if necessary, the timer according to the following instructions for
each model:
RCIK-3500CG
•
Press the button (E) to set the heating power. The LED (B) lights up. Set the value using the buttons (I) and
(J).
•
Press the button (H) to set the heating temperature. The LED (C) lights up. Set the value using the buttons
(I) and (J).
•
Press the button (K) to set the timer. The LED (D) lights up. Set the time using the buttons (I) and (J).
RCIK-3500GP
•
Press the button (F) to set the heating power or temperature. Switch between the parameters using single
button (F) presses. Set the values using the buttons (B) and (C).
•
Press the button (E) to set the timer. Set the time value using the buttons (B) and (C).
EN
RCIK-3500CGP, RCIK-3500CGW
A. Display
B. LED: heating power setting mode
C. LED: heating temperature setting mode
D. LED: timer setting mode
E.
Timer setting button
F.
LED: the device is on
G. On / Off button
H. Temperature / heating power setting button
I.
Value increase button
J.
Value reduction button
Publicité
