Publicité
e) Clean your power tool carefully. Check that the moving parts work properly and do not jam and that there are no parts broken or damaged to such an extent
that the operation of the power tool is affected. Contact an authorised service centre for any repairs needed before using the tool. Poorly maintained
power tools can cause serious damage or harm.
f) Keep any cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
g) Use the power tools, accessories, attachments, etc. in accordance with these instructions. Take into account the conditions of your workplace and the task
at hand. Using power tools for any purpose other than that for which they are intended can lead to dangerous situations.
Service
Have your power tool repaired only by trained personnel using only authentic spare parts. This will ensure that your power tool is always safe to use.
Safety instructions for drilling tools
a) Wear hearing protection when hammer drilling. Exposure to noise can cause hearing loss.
b) Use the additional handles supplied with the device. Losing control can result in injury.
c) Hold the device by the insulated gripping surfaces when you carry out work where the application tool can hit hidden power lines or your own power cord.
Contact with a live line can also energize metal parts of the device and cause an electric shock.
RESIDUAL RISKS
Even if you operate this power tool properly, residual risks always remain.
The following dangers can arise in connection with the construction and design of this power tool:
a) Damage to health that results from hand/ arm vibrations, if the device is used for a long period of time or is not properly operated and maintained.
b) Injuries and damage to property caused by flying parts of suddenly broken tool attachments.
Warning! This power tool creates an electromagnetic field during operation. This field can affect active or passive medical implants in certain circumstances.
To reduce the risk of serious or fatal injuries, we recommend that people with medical implants consult their doctor and the manufacturer of the medical
implant before operating the power tool.
SPECIFICATIONS
Technical Data
Model
BID6300
Voltage
230V/50hz
Power
900W
No-load speed
0-3000rpm
Impact frequency
0-4500bpm
Keyless chuck
13mm
Max drill capacity
25mm/wood , 12mm/steel - concrete
Cable Length
2m
Includes
1pc depth guage , 1pc auxiliary handle
Main Parts
1. Keyless chuck
2. Forward / Reverse lever
3. Drilling / hammer mode selector switch
4. Rotational speed controller
5. Locking button
6. ON/OFF trigger / Variable speed selector
7. Additional handle
8. Depth gauge
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance
and safety of the products. The parts described / illustrated in the pages of the manual that
you hold in your hands may also concern other models of the manufacturer's product line with
similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair,
inspection, repair or replacement work, including maintenance and special adjustments, must
only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-
provided equipment may cause malfunctions or even serious injury or death. The manufacturer
and the importer shall not be liable for injuries and damages resulting from the use of non-
conforming equipment.
WWW.NIKOLAOUTOOLS.COM
EN
3
Publicité
