Publicité
Cleaning the device
Always disconnect the power supply from the socket before cleaning!
Clean the appliance with a dry cloth. Do not use chemicals. You can also clean the air
inlets with a vacuum cleaner (it is best to clean the unit outdoors).
The particle sensor of the device is maintenance-free and does not normally have to be
cleaned. The cover behind which the particle sensor is located provides easy access in
the event of a defect.
Malfunctions and solutions
Current operating instructions can be found at www.comedes.com
Turn off the unit immediately and contact your dealer if any of the following problems
occur:
•
Fuse's blown.
•
Foreign material gets into the device.
•
The AC adapter or power cord heats up.
•
It is smoke, or burn smell perceptible.
Do not open the unit without authorized service personnel. However, you can
Check the following causes of malfunction yourself:
The device cannot be switched on:
•
Is the power supply plugged in correctly?
•
Has the fuse blown or is there no voltage at the socket?
•
Is the mains switch on the device switched on?
The air flow at the outlet opening is lower:
•
Is the filter too dirty or clogged?
•
Is the sleep function activated?
The device is disproportionately loud:
•
Does the device stand on an uneven surface?
•
Is the filter too dirty or clogged?
The device emits an unpleasant/unusual odor:
•
Is the unit used in rooms with high humidity or has the filter become wet?
EN-9
www.comedes.com
Publicité
