Publicité
Filter change
After some time in operation, the main filter must be replaced.
Switch and disconnect the device for this purpose. Put it upside down, or put it on its
side. It is best to place a soft cloth under the device to prevent scratches.
Now open the filter cover at the bottom of the unit and remove the filter, proceed as
follows (steps 1-3):
Now check the filter.
If the filter is not yet too discoloured or dirty, vacuum it with a vacuum cleaner
(preferably outdoors).
Please note that the replacement filter must be removed from the protective film before
it can be inserted into the device. Finally, the filter must be locked again (step 6).
Filter change indicator:
The unit is equipped with a modern filter change indicator.
If the filter has to be checked/replaced, this is indicated by the speed button flashing on
the display.
If the filter has been replaced, the filter change indicator must be reset again. Press and
hold the UV light button for at least 5 seconds. A signal tone sounds and the filter change
indicator is reset.
EN-8
www.comedes.com
Publicité
