Publicité
3.
Speed
With this function the fan speed and thus the air flow rate can be adjusted.
In order to be able to optimally adapt the air flow rate to the respective conditions, the
device has 5 fan stages.
By repeatedly pressing the switch, a fan speed between 1 (low) and 5 (high) can be
selected.
If you use the unit in automatic mode, the fan is controlled via the air quality sensor
(PM2.5).
4.
AUTO
Pressing this switch switches the device to automatic mode.
If you use the unit in automatic mode, the fan is controlled via the air quality sensor
(PM2.5).
The automatic mode can be left by simply pressing the speed button.
5.
Timer
With the timer you can set the running time of the device. There can be times
can be selected between 1 and 12 hours by repeatedly pressing the button.
If the timer function is activated, the display shows alternately the PM2.5 value and the
remaining running time.
To exit the timer function, the timer button must be pressed repeatedly until the PM2.5
value is shown on the display.
When the time has elapsed, the unit switches itself off automatically.
6.
Ionizer
With this key the ionizer can be switched on or off.
7.
Sleep
Pressing this switch activates the sleep function.
This mode behaves as follows:
•
The display illumination including all displays, with the exception of the Sleep display,
is switched off.
•
The device switches to the lowest and therefore quietest fan level.
•
The LED ambient light is switched off.
•
The timer can be set before the sleep function is activated. The device then switches
off automatically after the set time has elapsed.
•
To exit sleep mode, press any key.
8
UV light
Press this key to switch the UV light on or off.
EN-7
www.comedes.com
Publicité
