Publicité
INSTALLATION INSTRUCTIONS
Worktop Use Requirements
Intended for use with Gladiator
■
Cabinet and Flex 24" 1-Drawer 2-Door Base Cabinet.
There are many benefits to registering your product. Find out
more and register your product online at
www.gladiatorgarageworks.com. Consumers in Canada
can call: 1-800-807-6777
Install Worktop for Flex 24"
2-Door Base Cabinet
1. Unpack worktop and dispose of/recycle all packaging
materials.
2. Position one Gladiator
Flex 24" 2-Door Base Cabinet
®
without the mat.
NOTE: If you have installed casters on the cabinet, lock the
casters.
3. Set the worktop onto the top of the cabinet.
NOTE: Ensure the locations of 4 nuts in the worktop match
the holes in the cabinet's top.
4. Fix the worktop and the cabinet's top with 4 screws which
were removed from the worktop.
Flex 24" 2-Door Base
®
Install Worktop for Flex 24"
2-Door Base Cabinet
1. Unpack worktop and dispose of/recycle all packaging
materials.
2. Position one Gladiator
®
without the mat.
NOTE: If you have installed casters on the cabinet, lock the
casters.
3. Remove the drawer - Empty the drawer. Pull the drawer out
so it's almost fully extended. There are two black release
levers, one on each side of the drawer. Pull up the black
release lever on one side, while pushing down the black
release lever on the other side. While holding the levers in the
positions as instructed below, pull the drawer outward until it
is released from the drawer slides.
Push down – one side
Pull up – other side
4. Set the worktop onto the top of the cabinet.
NOTE: Ensure the locations of 4 nuts in the worktop match
the holes in the cabinet's top.
5. Fix the worktop and the cabinet's top with 4 screws which
were removed from the worktop.
Flex 24" 2-Door Base Cabinet
3
Publicité
